eCos Home

RedBoot Home


About eCos

Supported Hardware

Downloading and Installation

Documentation

FAQ

Mailing lists

Problems

Licensing

Anonymous CVS

Contributions and Development Projects

Legal

eCos

ARM AEB-1 Evaluation Board


[an error occurred while processing this directive] [an error occurred while processing this directive]

The ARM AEB-1 Evaluation Board platform, based on the Sharp LH77790 (ARM7DI) is supported by RedBoot. [an error occurred while processing this directive] This port is currently considered to be of Alpha quality only at this time.

[an error occurred while processing this directive]

The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.

[an error occurred while processing this directive]

Supported devices

Device drivers are included for:

    [an error occurred while processing this directive]
  • Diagnostic (polled) serial I/O [an error occurred while processing this directive]
  • Interrupt-driven serial I/O [an error occurred while processing this directive]
  • Ethernet [an error occurred while processing this directive]
  • FLASH [an error occurred while processing this directive]
  • PCI [an error occurred while processing this directive]
  • USB [an error occurred while processing this directive]
  • PCMCIA/Compact Flash [an error occurred while processing this directive]
  • Keypad [an error occurred while processing this directive]
  • Touchscreen [an error occurred while processing this directive]
  • Timekeeping (real-time clock) [an error occurred while processing this directive]
  • Watchdog [an error occurred while processing this directive]
  • SPI [an error occurred while processing this directive]
  • I2C [an error occurred while processing this directive]
  • ADC [an error occurred while processing this directive]
  • CAN [an error occurred while processing this directive]
  • Framebuffer

Availability

Hardware

Unfortunately the ARM AEB-1 development board is no longer available from ARM. It has been superceded by the Evaluator-7T, aka AEB-2.

Software

[an error occurred while processing this directive]

Source code for RedBoot is available publically from [an error occurred while processing this directive] the anonymous CVS repository only.

Documentation

[an error occurred while processing this directive]

Specifications are available for the [an error occurred while processing this directive] architecture and [an error occurred while processing this directive] processor and [an error occurred while processing this directive] platform and are available on-line from the manufacturer's web site.

[an error occurred while processing this directive]

Instructions for installing RedBoot on the AEB-1 can be found in the RedBoot User's Guide. [an error occurred while processing this directive] Board specific instructions, including installation instructions can be found here within the User's Guide.

[an error occurred while processing this directive]

Instructions for installing and using eCos on the AEB-1 are available here.

The most recent version of the full documentation set may be found on-line here.

[an error occurred while processing this directive]

RedBoot support

Prebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries.